New member needs Voltage Reg for MT 500

Before you can go any further, you must make an short introductory post here. Once you have done that you will get full access.
Forum rules
Please write a quick introduction. Which MT do you have or which one are you yearning for!....

Once we have been introduced, one of the admin team will upgrade your registration to standard.

Please note that if you are joining only to sell something, even if its an MT, you MUST ask first or your post will be deleted.

All new members are required to complete their locations (approximate) in your Profile and you are welcome to add your position in the 'Phoogle' map. Full instructions below.

Users who post less than 1 post per month may find their registration removed, this is our housekeeping not being militant!

Persevere - we're worth it!

Any probs or questions, please email us using the 'Contact Us' button at the top of your page.
Post Reply
Posts: 1
Joined: Mon May 28, 2018 3:39 am
Location: Gloucestershire

New member needs Voltage Reg for MT 500

Post by RobD » Tue Jan 01, 2019 9:38 pm

New to the forum, I have a MT 500 1985 I live in Gloucestershire and have had the bike for a few years now!

But it is over charging the battery. I have looked around and can see some 3 phase Harley regulator or more expensive comp one's.
Any advice on what would make a good reliable and perhaps up grade to the normal one under the seat?
Many thanks
0 x

User avatar
Posts: 950
Joined: Tue Jun 23, 2015 8:56 pm
Location: Newton Abbot

Re: New member needs Voltage Reg for MT 500

Post by lardmarc » Tue Jan 01, 2019 10:27 pm

Last edited by lardmarc on Wed Jan 02, 2019 10:27 am, edited 1 time in total.
0 x
“Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so.” (Adams, 2009).

User avatar
Posts: 4827
Joined: Sun May 30, 2010 7:42 pm
Location: Burlington , Shropshire

Re: New member needs Voltage Reg for MT 500

Post by Minter » Wed Jan 02, 2019 6:22 am

Welcome to the forum Rob..

We stock these too.. ... regulator/

Hope that helps

Sportax Racing
01952 850802
0 x
MTRC Shopkeeper
Manuals & Technical Publications on above MTRC shop link

Posts: 1122
Joined: Fri Jan 16, 2009 10:45 pm
Location: peterborough

Re: New member needs Voltage Reg for MT 500

Post by P.I.STAKER » Wed Jan 02, 2019 6:43 pm

Hi Rob and welcome aboard

Did you get your bike sorted
0 x
BMW R1100S

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests