MT350

Any MT parts
Post Reply
Ricky
Posts: 41
Joined: Tue Oct 13, 2015 7:58 am
Location: lincolnshire

MT350

Post by Ricky » Sat Jul 27, 2019 2:12 pm

Hi does anyone have a carb air box boot (the black rubber ring that fits to the carb and air box) and I also need an inlet rubber manifold.
cash waiting.
pm me if you do and i can paypal or direct bank transfer the cash on the same day.
Many thanks
Rik
1 x

User avatar
sparky
Posts: 138
Joined: Wed Apr 13, 2011 10:00 am
Location: lancashire

Re: MT350

Post by sparky » Sat Jul 27, 2019 3:05 pm

Gary at Sportaxracing or Force Motorcycles have them. The airbox to carb is a swine to get on and I got one of these off ebay : Shaftec CBK3000 Bootkit, about a tenner posted. Its a good alternative and easier to fit. Cut to length with a craftknife. As a temporary measure you can wrap insulation tape around it!
Dave.
1 x
1994 MT350
1960 AJS model 20
1960 Matchless 650 CSR
1999 BMW F650ST
Honda XBR500

Wirralman
Posts: 5510
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: MT350

Post by Wirralman » Sat Jul 27, 2019 3:33 pm

I have a carb to airbox rubber, I think it has been used but looks as new. pm me if interested

As for the airbox to carb rubber, as mentioned a universal boot can be trimmed down to size and does the job equally well. You can re-use old boots if they are intact- the dodge is to use a hairdryer to soften them and refit . You have to be quick to tighten clamps as they soon harden when they cool. Old boots heated and refitted seal just as good as new
0 x

User avatar
Minter
Posts: 4927
Joined: Sun May 30, 2010 7:42 pm
Location: Burlington , Shropshire

Re: MT350

Post by Minter » Sun Jul 28, 2019 8:20 am

Ricky wrote: ↑
Sat Jul 27, 2019 2:12 pm
Hi does anyone have a carb air box boot (the black rubber ring that fits to the carb and air box) and I also need an inlet rubber manifold.
cash waiting.
pm me if you do and i can paypal or direct bank transfer the cash on the same day.
Many thanks
Rik
Yes we have them Ricky ready for next day delivery. I find it easier to remove the air filter to fit the carb to air box rubber quickly and easily
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link

Ricky
Posts: 41
Joined: Tue Oct 13, 2015 7:58 am
Location: lincolnshire

Re: MT350

Post by Ricky » Mon Jul 29, 2019 8:13 am

sparky wrote: ↑
Sat Jul 27, 2019 3:05 pm
Gary at Sportaxracing or Force Motorcycles have them. The airbox to carb is a swine to get on and I got one of these off ebay : Shaftec CBK3000 Bootkit, about a tenner posted. Its a good alternative and easier to fit. Cut to length with a craftknife. As a temporary measure you can wrap insulation tape around it!
Dave.
Hi, I've looked at that on e bay but its a car cv book and looks far to small? , am I looking at the correct item?
Many thanks
Rik
0 x

Wirralman
Posts: 5510
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: MT350

Post by Wirralman » Mon Jul 29, 2019 8:50 am

I think the boot I used was for a car universal joint
0 x

User avatar
sparky
Posts: 138
Joined: Wed Apr 13, 2011 10:00 am
Location: lancashire

Re: MT350

Post by sparky » Mon Jul 29, 2019 9:20 am

That's the one. You only use part of the wider end.
Dave.
0 x
1994 MT350
1960 AJS model 20
1960 Matchless 650 CSR
1999 BMW F650ST
Honda XBR500

User avatar
Force Motorcycles
Posts: 491
Joined: Thu Jul 09, 2015 10:57 am
Location: Staffordshire

Re: MT350

Post by Force Motorcycles » Mon Jul 29, 2019 9:42 am

Hi Rik,

We have these products in stock...

:arrow: Carb Air Box Boot

:arrow: Inlet Rubber

Regards,

Force
0 x
Force Motorcycles - The World's Largest MT350 and MT500 Parts Dealer

The UK's Exclusive and Official ROTAX Parts Dealer

:arrow: Visit Our Online Store

:arrow: Follow Force Motorcycles on Facebook!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests