Intro

Before you can go any further, you must make an short introductory post here. Once you have done that you will get full access.
Forum rules
Please write a quick introduction. Which MT do you have or which one are you yearning for!....

Once we have been introduced, one of the admin team will upgrade your registration to standard.

Please note that if you are joining only to sell something, even if its an MT, you MUST ask first or your post will be deleted.

All new members are required to complete their locations (approximate) in your Profile and you are welcome to add your position in the 'Phoogle' map. Full instructions below.

Users who post less than 1 post per month may find their registration removed, this is our housekeeping not being militant!

Persevere - we're worth it!

Any probs or questions, please email us using the 'Contact Us' button at the top of your page.
Post Reply
Bhunji
Posts: 1
Joined: Mon May 27, 2019 8:31 pm
Location: UK

Intro

Post by Bhunji » Mon May 27, 2019 8:35 pm

Hello,

I've recently become the owner of an MT350, a hand me down from my dad.

It hasn't been started in a few years and the fuel tank has a few tiny holes in it, so I know I have some work to do...

I'm glad there's a community dedicated to these bikes, hopefully I can learn a lot!
0 x

Wirralman
Posts: 5311
Joined: Fri Jan 16, 2009 9:45 am
Location: Wirral, Merseyside

Re: Intro

Post by Wirralman » Mon May 27, 2019 9:15 pm

Welcome to the forum

Go to the forum Top Tips section and about 4 topics down you will find Initial Servicing Guide, which you may find useful

As for your tank, I personally favour using POR 15 sealant, although I haven't used it on a tank with holes in , it might solve your problem

I suggest you go through the whole fuel system, stripping and cleaning fuel tap, stripping the carb and thoroughly cleaning jets, enrichener especially. If you want to try to avoid this task, at least drain the float bowl using the drain screw to remove old fuel from the carb

Your declared location - United Kingdom - is unlikely to lead to any other forum member offering help, you may consider amending it

Good luck with your bike
0 x

User avatar
Force Motorcycles
Posts: 453
Joined: Thu Jul 09, 2015 10:57 am
Location: Staffordshire

Re: Intro

Post by Force Motorcycles » Tue May 28, 2019 9:25 am

Welcome to the forum! :D

Force
0 x
Force Motorcycles - The World's Largest MT350 and MT500 Parts Dealer

The UK's Exclusive and Official ROTAX Parts Dealer

:arrow: Visit Our Online Store

:arrow: Follow Force Motorcycles on Facebook!

User avatar
Minter
Posts: 4775
Joined: Sun May 30, 2010 7:42 pm
Location: Burlington , Shropshire

Re: Intro

Post by Minter » Wed May 29, 2019 6:42 am

Welcome along Bhunji!

Enjoy the bike and forum and hopefully see you at some of the ride out meetings.. I support all of the ride outs and bring along the club shop and bike spares..

Gary
Sportax Racing
01952 850802
0 x
SPORTAX Racing ROTAX
http://www.sportaxracing.co.uk
MTRC Shopkeeper
http://sportaxracing.co.uk/product-category/mtrc-shop/
Manuals & Technical Publications on above MTRC shop link

P.I.STAKER
Posts: 1110
Joined: Fri Jan 16, 2009 10:45 pm
Location: peterborough

Re: Intro

Post by P.I.STAKER » Sun Jun 02, 2019 9:21 pm

Hi and welcome to the forum
0 x
ARMSTRONG MT500 1984
BMW R1100S

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest